
Mod. Z PVC
50001
Louver made of aluminium or PVC, material that also provides good mechanical performance but in a more economical version.
The supports are punched equidistantly (allowing various steps) to facilitate the levelled anchoring of the slats without the need for fixing screws.
This spacing will depend on the desired degree of coverage and aeration area.
Characteristics
Slat depth |
35,50 mm | |
Slat height |
100 mm | |
Slat weight |
0,45 kg/ml | |
Nº slats/ml |
Step 7 to 11 mm | |
Support |
35×40 / 40×40 mm | |
Separation between support profile centres (mm) |
2000 mm | |
Slat overhang maximum (mm) |
300 mm | |
Maximum distance between fixture points of supports (mm) |
1500 mm | |
Supports made in aluminium alloy |
EN AW 6063 T5 | |
Slat material |
PVC | |
Wind resistance (UNE-EN 13659:2016) |
112 km/h |
NOTE:
* When this distance is more than 1.500 mm, ask us for information about the most suitable structural frame for your installation.
* If the distance is greater than those shown, a structural profile must be attached to the surface according to the project.
* Test performed with dual 40×40 support.



Gallery






