Mod. V-5

50150

Perfect for covering facades to give the building an avant guarde touch. It is also ideal for closing openings between walls, fencing gardens and as a traditional system for closing ventilation openings, all while allowing a good entry of light.

 

Thanks to its easy installation, the supports are fixed vertically and the slats are then clipped directly to the supports.

 

The step or separation between the slats is standard.

 

Optionally, side plugs can be fitted.

Characteristics

Profile depth

49,50 mm

Altura del perfil

13-20 mm

Profile weight

0,45 kg/ml

No slats/ml

Step 22,2

Separation between support profile centres

1200 mm

Slat overhang maximum

300 mm

Maximum distance between fixture points of supports

1500 mm

Wind resistance

(UNE-EN 13659:2016) CLASE 6

112 km/h

* When this distance is more than 1.500 mm, ask us for information about the most suitable structural frame for your installation.

* NOTE: If the distance is greater than those shown, a structural profile must be attached to the surface according to the project.

* Test performed with dual 40×40 support.

 

A team available to the needs of our customers

Always close to you and willing to help